Injection Mold Flow Analysis - Insta-Quote System
(No CAD files are necessary to be uploaded to get your quote)

It's as easy as 1, 2, 3 -

1. Fill in the company information

2. Check one of the boxes telling us what you are interested in; Plastic Flow simulation Consulting, or Software or Both.

3. Supply your Part and tool information and select your analysis and options.

An Insta-Quote get sent to your inbox!
(Note: In some cases.  Budgetary quotes will be sent which require review of the specifics not addressed within this form or per your comments at the bottom of this page.)

1. Company Information: * indicates a required field
Are you a return Customer or have you used this Insta-Quote system before? Yes
( Yes is not a required field; this is for internal purposes and does not increase or decrease your quote)

*  

Company Name :

*  

Postal address :

 * City or Town: 
*

 USA State or other Country: 

 * Zip (post code):    
For addresses outside the United States, best fit your information
* Company Email
(where the quote will be sent)
*   Phone Number
  Company Website
* Contact Name 

(By checking this box you will not be sent an automatic quotation and all information selected below will not be forwarded.  We will contact you with help in filling out this form.) 

Check here if you would like help in choosing the correct options for your specific requirements? 


2. What are your interests: Select one
VISI Flow Consulting Services
* Fill out the information required in the Part and Job Information section below.

Software only (do not fill out the part and job information) Select all interests. Will require review prior to price quote.

Software of Interest:
Mold, Die or VISI Flow software
Specialist CAM Machining software - PEPS
Stamping software - Smirt
Shop Floor CAM Software - Machining Strategist

Consulting Services and  Software Select all interests. Will require review prior to software price quote.

*  Fill out the information required in the Part and Job Information section below and select software of interest.
Software of Interest:
VISI Mold and Die including Flow software
Specialist CAM Machining software - PEPS
Stamping software - Smirt
Shop Floor CAM Software - Machining Strategist

3. Part and Job Information:
(Note: *This section is not required if you are interested in software ONLY.   Otherwise, fill in the part information, select your desired analysis, and then select the appropriate sub fields.)
*   Part Name(s)
* Material type   ie. ABS, PP, Nylon, 10% GF-nylon ect. or the exact grade if available.
Part Number(s) 
Please Select your desired analysis (A or B and then your sub fields)

A - Part Analysis (result details) For filling results using gate location(s).  NO runners or gate geometry will be analyzed.

Includes the following analysis sequence:

Best Gate - Provides a graphical gate location area according to the part geometry indicating where to try a filling analysis.

Molding Window Analysis - Molding window analysis which analyzes the part geometry and provides the optimum mold and melt temperatures for the type of finish specified.

Additional Options:
Part Cooling Quality Analysis
Sink Mark Analysis
Warpage Analysis (out of plane deflections)
Alternate material iteration requests other than the main material specified (more info) 


B - Advanced Mold Analysis (result details) Optimizes single cavity, multi-cavity and family layouts with cold and/or hot runners or
                                                                                       3-plate and optimizes the gates or drops plus fully optimizes the part.

Includes: Best Gate Analysis
Includes: Molding Window analysis
Includes: Part Analysis and all options
                  Part Cooling Quality Analysis
                  Sink Mark Analysis
Includes: Gate(s) location and sizing optimization
Includes: Runner / feed system optimization

* Is there an existing design layout for this mold: Yes   No  (This will let us know to run a base check analysis)
*  Number of Cavities per part:  (c)  
*
Is this a Family Mold?   No (Proceed to Mold Information section)
Yes (Answer questions A & B below)

**  A

 How many different parts? (dp)

** B

 Are these mirrored "left-hand right-hand" parts? Yes    No
     ** ( The number of cavities per PART (c) X the number of different parts (dp) MUST = total cavitation for correct quote)

* Mold Information: (please select one)
Direct Sprue with disk or fan gate (this option is for a center-gated single cavity)
Cold Runners
Hot Runners
Hot Drop to Cold Runners
3-Plate Mold

Additional Options:
Cooling Circuit Analysis
Warpage and Pack Analysis (out of plane deflections)
Alternate material iteration requests other than the main material specified (more info)   
 

* Analysis Checklist:
This form addresses all issues concerning the job.
This form does not address all of the issues entailed in this job. 
(A budgetary quote will be sent, but a final quotation requires OCD, inc. review)
Please comment on any issues not addressed within the form: 
(Note: by commenting in this field, Insta-Quote automatically makes this a Budgetary Quotation)